Cooling Jacket Mixing Tank

1.Production introduction of cooling Jacket Mixing tank

When production or transport companies have to store products in storage tanks or tank systems, they need to protect against excessive heat or cold and maintain the desired environmental conditions. Heating or cooling product in a tank can be a major energy expense and a concern to all our customers. Efficient sizing of tanks, insulation, heaters, or coolers depends on an accurate calculation of the thermal transfer required. One of the most effective ways to accomplish that is with a jacket. A jacket is an outer layer covering the original tank shell where the medium flows between the surfaces, which results in efficient and uniform thermal transfer to the product.

Types of jackets for vessel

● Dimple Jacket

● Plain Jacket

● Half pipe coil Jacket

Plain jacket

It is most suitable where heating is to be done with steam. Jacket height is usually up to the liquid height in the vessel. Jacket can be fabricated in one piece or can be divided into number of parts and all parts operating in parallel. For higher flow segmental jacket is preferred when downstream vapors are used as heating medium, plain jacket is preferred.

Spiral baffling can be provided in the jacket.. It helps to induce turbulence and increase the heat transfer coefficient. A vessel with plain jacket and spiral baffles.

Half pipe coil jacket

If jacket pressure is the controlling parameter in estimating vessel wall thickness, then half coil jacket is preferred. These are used for high capacity vessels and where high velocities for circulating hot oils, glycols etc. is required. In these jackets by passing, short circulation is completely avoided.

Dimple jacket

It can be fabricated by using thin sheets. It is useful for high jacket pressure operation. Dimple jacket can induce turbulence even at very low flow velocity. It can be used for circulating steam and hot Oil.

Jacketed Mixing Tank Applications

Our jacketed mixing tanks are used for a variety of applications across several industries, including:

● Brewery

● Cannabis

● Cosmetics/Personal Care

● Dairy

● Food & Beverage

● Pharmaceutical

● Plant Based Food and Beverages

Hot Tags: cooling jacket mixing tank, China cooling jacket mixing tank manufacturers, suppliers, factory, Double Jacket Mixing Tank, Heating Jacket Mixing Tank, Jacket Mixing Tank, Coil Heating Jacket Mixing Tank, Cooling Jacket Mixing Tank, Three Layer Jacket Mixing Tank